149 A5, Harare, ZimbabweManufactured in India · Supplied to Zimbabwe

Buying guides

What Should Your Drilling Rig Quotation Include?

A useful equipment offer makes the machine, component condition and responsibilities clear. Use this checklist to compare drilling rig quotations.

A drilling rig quotation should let you see exactly what you are buying. When offers are vague, the cheapest one often turns out to exclude the compressor, the rods or the delivery you assumed was included. Use this checklist to make every offer comparable.

1. The drilling assembly

Ask for the model and the numbers that define what the rig can do: rotary head torque and speed range, pull-up and pull-down force, feed speed, mast travel and the rod length it handles. A maximum depth figure on its own says little; it depends on hole size, formation and air.

2. The carrier

State whether the truck, tractor or crawler is new, refurbished or supplied by you. For trucks, the make, model, axle configuration and engine; for used carriers, the year, hours or kilometres and inspection evidence.

3. Compressor and air system

For DTH drilling the compressor is as important as the rig. Check the air volume (CFM) and pressure (PSI or bar), whether it is included, and whether it suits the hammer size and depth you plan.

4. Rods, hammers, bits and subs

Look for sizes, quantities and thread types. Twenty rods is a very different package from forty. Check that hammers and bits match the hole diameter and that subs connect every part of the string.

5. Delivery and documents

Where exactly is the price delivered to? A port, a border town, a Harare yard or your site? Which freight legs and which documents are included?

6. Handover and support

Training, commissioning, operating manuals, a recommended spares list and warranty terms should all be written down, with their exclusions.

7. What is still open

Every quotation has assumptions. A good one lists them: items you will supply, decisions not yet made and conditions that could change the price. Keep the final approved revision as the reference for the order.

Ready to compare? Request a configured quotation and we will itemise every point above.

Questions

Why do rig quotations vary so much in price?

Usually because the scope differs: compressor size, tooling quantities, carrier condition and delivery point. Put offers side by side using the same checklist.

Keep reading

More buying guides

Start a clearer conversation

Tell us the job. We will configure the rig.

Share the work, the location in Zimbabwe and what you already know. We reply with questions or a written proposal listing exactly what is included.

CallWhatsAppGet a quote